My company developed the pneumatic and mechanical composite mixer is summarized in the mechanical and pneumatic mixer on the basis of the advantages of the development of the composite mixer not only has a mechanical mixer mixing uniformity, but also has a pneumatic mixer mixing fast, low power, small parts and components consumption
My company developed the pneumatic and mechanical composite mixer is summarized in the mechanical and pneumatic mixer on the basis of the advantages of the development of the composite mixer not only has a mechanical mixer mixing uniformity, but also has a pneumatic mixer mixing fast, low power, small parts and components consumption, especially the process arrangement does not require a special process route, only in the bypass of the conveying equipment to be improved slightly Can be installed and used. After the production and use of many cement enterprises, well received by users. It can also be used for mixing other powdery materials! Can be customized according to the specific requirements of customers!
In the mixing box equipped with mixing shaft, blades installed at the bottom of the permeable layer of the inflatable box, inflatable box by the Roots fan blowing into the high-pressure air, the material into the mixing box by the bottom of the first inflatable box gasification and fluidization, followed by the mixing box in the mixing shaft blades and the role of the mixing box and the full mixing, due to the mouth of the mixing box side of the upper part of the mixing box, after mixing the material from the overflow of the outlet. The material below the outlet will be stirred again with the subsequent material entering the mixing box and then overflow through the outlet. Due to the full fluidization of the material in the mixing box, coupled with the overflow structure of the material, the granular material in the material will be deposited at the bottom of the mixing box, to be worked to a certain time when the mixer needs to be shut down, from the lower part of the mixing box to remove the slagging mouth to remove the granular material.
1、It must be powder material, 45um square hole sieve sieve residue is below 15%. 2、Moisture is less than 1.5%. 3、Material specific gravity is less than 2t/㎥. 4、No viscosity. 5、Accurate measurement of feeding material.
